Abbott ARCHITECT RHS - Introduction and Objectives

MODULE 3: ROBOTICS
ARCHITECT
®
RSH System Service Training Guide 3-3
201532-102 FOR INTERNAL USE ONLY
INTRODUCTION
This module introduces the principles, diagnostics and components associated with Robotic Systems of the
RSH including:
• Carrier Transport Assembly
• Transport Motor and Pulley Assembly
• Carrier Positioner Assembly
Objectives
Upon completion of this module, the student will be able to:
1. Use diagnostic tools and interpret data to isolate the root cause of Robotic System failures.
2. Identify the physical location of the Robotic System components.
3. Perform the procedures required to remove and install key components of the Robotics System.
4. Perform the processes used to verify the functionality of the components used in the Robotic System.
5. Perform the maintenance procedures for the components used in the Robotic System.