LinCuri, Continued
Platform Event Filtering (PEF) commands
-----------------------------
-pef -ARInfoSet index name mailId SNMPDest PPPID NotifyMethod NotifyMedium
PPPPass AlertType
NotifyMethod can be "Mail" or "SNMP" and
NotifyMedium can be "Lan" or "PPP"
AlertType can be All,Disable or Critical
-pef -ARInfoGet index
Firmware flasher commands
-----------------------------
-flash -read filename
-flash -update [-boot] filename
-flash -saveconfig
-flash -saveSDK
-flash -getconfig filename
-flash -putconfig filename
-flash -compareboot filename
Network configuration commands
-----------------------------
-Net -GetMac
-Net -SetMac <MAC Address> - <Ex: 00:2a:3b:4c:5d:1d>
-Net -GetConfig
-Net -SetDHCP
-Net -SetSTATIC IP Netmask Gateway
Host HeartBeat commands
-----------------------------
-HB -GetHB
-HB -SetHB <Heartbeat Time Interval (Seconds)> - <Between 6 and
2147483646>
General purpose commands
-----------------------------
-Gen -Reset -SaveConfig|-NoConfig (Reset G2 card)
-SaveConfig (Save Configuration)
-NoConfig (Don't save Configuration)
-Gen -fwInfo (Get Firmware Info)
SDK commands
-----------------------------
-SDK -uploadSDK <sdkfile.dat>
-SDK -deleteSDK
-SDK -rereadSDK
-SDK -readsensors
Advanced Configuration commands
-----------------------------
-ModemCfg -get <dev>
-ModemCfg -set <-s baud> <-i initString> <-p phoneNumber>
-PPPCfg -get
-PPPCfg -set ServerIP ClientIP
-ASRCfg -Get
-ASRCfg -Set ENABLED|DISABLED POWERCYCLE|RESET Delay
Minimum ASR Delay is 45 Seconds
DISABLED does not require extra arguments
ARMC/2 User’s Guide
124
To Next Page
Loading...