Acer ARMC_2 - Lincuri Help File

LinCuri, Continued
LinCuri Help File
_______________________
LinCuri version 1.5.7.0
_______________________
Usage:
./LinCuri -[nw IP username] [cd] <arguments>
-------
Example:
./LinCuri -nw 10.10.1.10 username -sel -listall to connect on network
./LinCuri -cd -sel -listall to connect via host interface
-------
Logging in
-----------------------------
Host '-cd' based access does not require you to login
Network access '-nw' requires a login. Password cannot be specified on the
command line.
You will be prompted for the password.
Scripting option will prompt for password only once at the beginning
Script mode Commands:
-----------------------------
Script file format is any of the other argument formats mentioned below
For e.g : LinCuri -script myscr.scr
-script ScriptFile
myscr.scr can contain the following lines if you want to get all users and
then get network config
-user -listall
-net -getconfig
User Manger Commands
-----------------------------
-user -add username password
-user -del username password
-user -add username password auth pvt
-user -listAllUser
-user -listAll
-user -getSnmp
System Event Log (SEL) Commands
-----------------------------
-sel -listAll
-sel -selInfo
-sel -clear
-sel -setPolicy <ROLLOVER | STOP>
-sel -getPolicy
Cont’d
Appendix D : Troubleshooting
123