Acer ARMC_2 - Appendix D Troubleshooting; Screen Distortion; Problem; Symptom

Appendix D Troubleshooting
Screen Distortion
Problem
The screen on the host system is blurry when using screen resolutions lower than
1024x768. This happens when you use both console redirection and the physical terminal
on the host system.
Clarity Image
Normal
Blurry
Symptom
The ARMC/2 card's VGA chip has both a digital and analog signal. See the picture below.
The digital signal is the FPD. The analog signal is the Monitor.
Cont’d
ARMC/2 User’s Guide
132