System Utilities 2-12
Boot Manager
The Boot Manager allows users to select the boot device without accessing the BIOS utility.
NOTE:
Boot Manager is available only if the F12 Boot Menu parameter in Main menu is set to
Enabled (refer to Main on page 2-5).
Perform the following to use the F12 Boot menu:
1. Start the computer.
2. When prompted, press the F12 key during POST. The Boot Manager screen appears.
Figure 2:12. Boot Manager Screen
3. Use the ↑ and ↓ keys to highlight a boot device.
4. Press Enter to select and continue with the boot procedure.
Boot Option Menu
1. Network Boot : BRCM MBA Slot 0200 v15.0.11
2. HDD : XXXXXX
3. ATAPI CDROM : XXXXXX
ʅandʆto change option, ENTER to select an option
Boot Manager
To Next Page
Loading...
