System Utilities 2-14
DOS Flash Utility
NOTE:
Plug the AC power adapter to a power source before performing the DOS Flash Utility.
Perform the following to use the DOS Flash Utility:
1. In Windows, unzip the BIOS ROM file “BIOS_v1.06_DOS_WinX86X64.zip”.
2. Copy the “DOS” and “ROM” folders to the root directory of a DOS bootable USB disk.
Figure 2:13. Copy BIOS ROM file
3. Reboot the system, then press F2 during boot to enter the BIOS Setup Utility.
4. Select the Boot menu.
5. Change the boot priority order 1 to USB HDD. (refer to Boot on page 2-10).
Figure 2:14. Changing the BIOS Boot Priority Order
COPY
InsydeH2O Setup Utility Rev. 3.7
Information Main Security Cppu Exit
Item specific Help
Boot priority order:
Use <↑> or <↓> to select a
device, then <F5> to move it
down the List, or press <F6> to
move it up the list. Press <Esc> to
escape the menu
1. HDD0 : TOSHIBA MK5059GSXP
2. ATAPI CDROM : MATSHITA BD UJ160
3. USB FDD :
4. Network Boot : Atheros Boot Agent
6/!VTC!IEE!;!Hfofsjd!VTC!Gmbti!Ejtl!
6. USB CD ROM :
To Next Page
Loading...
