System Utilities 2-26
Clearing the Password Check and BIOS Password
Clearing the Password Check
The password check can be removed by shorting the “RTC_RST” point with a metal instrument.
1. Remove the battery (refer to Battery Pack Removal on page 5-7).
2. Remove the base cover door and the memory module (refer to DIMM Module Removal on
page 5-21).
3. Under the memory module slots, locate the CMOS jumper.
4. Use an electronic conductivity tool to bridge the two points of the jumper.
Figure 2:41. CMOS Jumper
To Next Page
Loading...
