System Utilities 2-22
Using the LAN MAC EEPROM Utility
1. In Windows OS, copy the following LAN MAC Tools to a bootable USB HDD device:
• EEPROM.EXE (This is the writing tool of EEPROM)
•MAC.BAT (This is the batch file for writing MAC value)
• MAC.CFG (This is the configuration and data file for EEPROM.exe)
Figure 2:30. Copying LAN MAC Tools
2. Use a text editor (e.g. Notepad) to open MAC.CFG.
Figure 2:31. Opening Text Editor
The file content is shown below. If necessary, modify the data.
Figure 2:32. LAN MAC Values
• WriteData=’001122334455’
• StartAddr=7A
• WriteLeng=6
• KeepByte=0
To Next Page
Loading...
