2-19 System Utilities
CAUTION:
• Do not turn off the computer during the Flash process.
• Do not put the system into standby or hibernation mode.
• Do not launch other applications.
• Do not press the Power button, open/close the lid, dock/undock the system, insert or
remove USB, 1394, or PC card.
4. When the update completes, WinFlash will close all AP and restart the system.
Winflash Error and Warning Messages
• If the AC adapter is not plugged in before Winflash starts, the following message is
shown:
Figure 2:24. AC Detect Error Message
• After executing Winflash, if the AC adapter is not plugged and the battery power is low,
the following message is shown:
Figure 2:25. Battery Power Warning Message
• Check the BIOS ROM file size. If the BIOS ROM file size is different from the ROM part
size, the following message is shown:
Figure 2:26. BIOS ROM File Size Error Message
To Next Page
Loading...
