7351 Series Digital Multimeter Operation Manual
6.7.3 ADC Command Reference
6-24
Item
Command
Description
Initial
value
R6451
Measurement
condition
Measurement range
DCV ACV ACV
(AC+DC)
2W DCI ACI ACI
(AC+DC)
LP-
2W
Freq
R0
AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO
R3
200 mV 200 mV 200 mV 200 - - - 200 (200 mV)
*1
R4
2000 mV 2000 mV 2000 mV 2000 - - - 2000 (2000
mV)
R5
20 V 20 V 20 V 20 k - - - 20 k ( 20 V)
R6
200 V 200 V 200 V 200 k 200 mA 200 mA 200 mA 200 k (200 V)
R7
1000 V 700 V 700 V 2000 k 2000 mA 2000 mA 2000 mA 2000 k (700 V)
R8
- - - 20 M 10 A 10 A 10 A 20 M -
R9
- - - 200 M -----
R? Reply: One of R0, R3 to R9 -
Range Fix RX Range switching from AUTO to MANUAL
Sampling rate PR1 FAST
PR2 MED
PR3 SLOW1
PR4 SLOW2 (The same as PR3 in the frequency measurement) -
PR? Reply: One of PR1 to PR4 -
Number of display
digits
RE3 3 1/2-digit display
RE4 4 1/2-digit display
RE5 5 1/2-digit display
RE? Reply : One of RE3 to RE5 -
Auto-zero AZ0 OFF -
AZ1 ON -
AZ2 ONCE (Auto-zero is set to OFF after executing once.) -
AZ? Reply: AZ0 or AZ1 -
Continuity thresh-
old constant
KOMn n:1 to 1000 () setting resolution: 1 (10) -
KOM? Reply: KOMdddd -
*1: Part of the range configuration differs from the 7351 series.
To Next Page
Loading...
Need help?
General
