Additel 226Ex - Page 102

91
(current/ voltage), as shown in the Figure 7 or 8.
2. Create the task
Create the corresponding DUT tasks as described above and fulfill the necessary information. See below table.
Table 30 Delta-pressure flowmeter task setting
Subject Valid value Description
Name Numbers, letters, symbols Task name
S/N Numbers, letters, symbols Task S/N
Model Numbers, letters, symbols Model of DUT
Input Numbers Input range of DUT
Output Numbers
Output range of DUT, switch the unit to change the input signal type
(current/ voltage)
Accuracy
0.06%,0.1%,0.16%,0.25%,0.4%,
0.6%,1%,1.6%,2.5%,4%,custom
Accuracy of DUT, the output is customizable
Transfer function Linear / square / square root Transfer function of the DUT signal
Owner Numbers, letters, symbols Owner of DUT
Location Numbers, letters, symbols Location of DUT
Note Numbers, letters, symbols Additional information
3. Task setting
Refer to the task setting in paragraph 6.1.1.