Additel 226Ex - Figure 19 TC Measurement

50
Figure 19 TC measurement
Click the "Setup" button of the TC measurement channel to set various parameters for the thermocouple measurement
function.
Table 13 TC measurement settings
Subject Valid Value Description
Sensor type All supported TC types Select the type of thermocouple sensor
Cold junction type Auto/Fixed
Select the cold junction compensation method, auto means to use the built-in
cold junction sensor of the calibrator
Ext CJC value Numeric Content
Set customer value for the cold junction compensation value, only available
when user selects fixed as the cold junction type
Temperature unit K / °F / °C Temperature units’ selection
Resolution 0~0.001 Temperature display resolution