Additel 226Ex - Flow Volume Totalizers

93
Output Numbers Output range of DUT, variety of flow units available
Decimals Option 0~3 The last decimal digit of the DUT’s display
Accuracy
0.06%,0.1%,0.16%,0.25%,0.4%,
0.6%,1%,1.6%,2.5%,4%,custom
Accuracy of DUT, the output is customizable
Transfer function Linear / square / square root Transfer function of the DUT signal
Owner Numbers, letters, symbols Owner of DUT
Location Numbers, letters, symbols Location of DUT
Note Numbers, letters, symbols Additional information
3. Task setting
Refer to the task setting in paragraph 6.1.1.
4. Start the task
 For part of the content, refer to Start the task in paragraph 6.1.1.
 The calibrator will automatically use the voltage and current output gears to output electrical signals to the DUT
according to the type of DUT input set by the users, and the users need to manually input the value of each set
point.
5. Finish the task
Refer to Finish the task in paragraph 6.1.1.
6.3.3 Flow volume totalizers
1. Connect to DUT