Additel 226Ex - Calibrating Pressure Devices; Dial Pressure Gauges and Digital Pressure Gauges

70
(4) After the task is executed, click the save button and complete the information required for saving the task data
in the pop-up task saving interface. Click the confirm button to save the task data.
(5) For tasks that have been executed and saved task data, the task execution results will be displayed in the task list on
the main interface of the document task. The icon in the task list indicates that the task has failed to execute, and the
DUT does not meet the accuracy requirements; the icon indicates that the task has passed, and the DUT meets the
accuracy of the task. Click the task in the task list to view task details, task running data, edit task details, or re-execute
the task.
6.1 Calibration pressure devices
6.1.1 Dial pressure gauge and digital pressure gauge
1. Connect to DUT
Connect the external pressure module to the LEMO port A or B.