ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 39 -
1.2.2 Manual
In the main menu, press [F1] (Auto) [F2] (Manual) to enter Manual interface:
Manual / Speed: / Program name:
G / G: switch Manual/Jog Ethyne control / Torch up
X X X: Set coordinates of X axis Preheating control / Torch down
Y Y Y: Set coordinates of Y axis Cutting Control / Height control
Shift Z Shift: Set coordinates of Z axis Current coordinates:
Preheating delay:
Prompt: Manual
Working state: Stopped / Flame
Return / Jog Break point / Clear / Return reference / Return
Fig. 3.1.2.2 Flame Manual Interface
To Next Page
Loading...