ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 40 -
Manual / Speed: / Program name:
G / G: switch Manual/Jog Torch up / Cutting Control
X X X: Set coordinates of X axis Torch down/ Height control
Y Y Y: Set coordinates of Y axis Current coordinates:
Shift Z Shift: Set coordinates of Z axis Preheating delay:
Prompt:
Working state: Stopped / Plasma
Return / Jog / Break point / Clear / Return reference / Return
Fig. 3.1.2.2 Plasma Manual Interface
To Next Page
Loading...