Adtech ADT-HC4500 - Page 45

ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 44 -
the figure below
󳅬󳕾󰡞󱱭󰐉󱯹󰓗󱥻󲙲 Please select corresponding graphics processing function 󱾀󰐄 /
Program name
󰓈󰓗󰆯󰅭 Current graphics size
󰄲 Width
󴁍 Height
󳕉 Return /󳓡 Turn /󳕾󲷁 Select line /󳕾󱘮 Select point /󳮪 Array /󳕍 Restore /󳕉 Return
Fig. 3.1.2.5.1 Graphics Processing Interface
1.2.5.1.1 Turn
In above processing interface, press [F1] (Turn) to enter the interface.