ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 45 -
Current state: Turn / Program name
Current graphics size
Height
Width
Return / X X mirror /Y Y mirror /XY XY mirror / Rotate / Correct /
Restore / Return
Fig. 3.1.2.5.1.1 Graphics Processing Interface
1.2.5.1.2 X/Y mirror
Please refer to Chapter II Section 17: Mirror.
1.2.5.1.3 Rotate
Please refer to Chapter II Section 18: Rotate.
1.2.5.1.4 Correct
Please refer to Chapter II Section 19: Correct.
1.2.5.1.5 Reset
In the Rotate interface, press [F6] to restore current graphics to the one before processing immediately.
1.2.5.1.6 Selecting line
Please refer to Chapter II, Section 15: Selecting Line.
To Next Page
Loading...