Adtech ADT-HC4500 - Page 72

ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 71 -
󲂾󱼰󰃅󰤜󰫥󱫁󳳗 Plasma Control Parameter Interface
󳋬󰒜󰑫󰭫 Start arc delay
󰴟󰑫󰭫 Torch up delay
󰴟󳯂󰑫󰭫 Torch down delay
󱿴󰃉󰑫󰭫 Preheating delay
󰡅󲽇󳖔󰐛󱅉󱣼 Corner speed ratio
󰄏󱿯󳭩 Positioning up time
󲒒󲷚 Slot compensation
󱿴󰃉󰑫󰭫 Preheating up delay
󰡅󲽇󰒜󰓹 Corner arc radius
󰡅󲽇󳯂󳖔󰐛 Corner down speed
󳕉 Return /󲉰󲑔 System / 󳖔󰐛 Speed /󳅸󰫩 Adjust /󰤜 Control / 󲈳󰐛 Precision /󰃍 Store / 󳕉
 Return
Fig. 4.4.2 q
Plasma
Parameter Description Unit
Edge perforating
prompt
Enable perforating prompt while perforating
Preheating delay The preheating time while perforating steel plate, which 0.01 sec