ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 78 -
Select the output port to set
Start arc control: Default
Corner control: Default
Perforating torch up control: Default
Perforating torch down control: Default
Return / Return
q Plasma
Fig. 5.1.2 Customizing Output Port
4) In the Diagnosis interface shown in Fig. 5, press [F5] to show the latest update of the system.
5) In the Diagnosis interface shown in Fig. 5, press [F6] to show current version info. Fig. 5.1.3
shows the version info of HC4500.
Current version:
4500 V0.1.0
If you have any suggestion or inconvenience, please contact us, and we will do our best to improve.
Thanks!
July 19, 2010
Return / Return
Fig. 5.1.3 p HC4500 Version Display
To Next Page
Loading...