Adtech ADT-HC4500 - Page 78

ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 77 -
󳅬󳕾󰡞󲻶󳄳󲓣󱯹󳔈󰤜Select the output port to set
󱘮󱗠󰤜󴑍󳄙Ignition control: Default
󳷹󱙢󱆜󰤜󴑍󳄙Preheating oxygen control: Default
󱘉󰤜󴑍󳄙Ethyne control: Default
󱆜󰤜󴑍󳄙Cutting oxygen control: Default
󰴟󰤜󴑍󳄙Torch up control: Default
󰴟󳯂󰤜󴑍󳄙Torch down control: Default
󳕉Return / 󳕉 Return
p Flame