ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 84 -
Current directory
UCan’t find USB disk. Press any key to return
Return / New / Copy / Delete / Return
Fig. 6.3.1 USB disk isn’t connected successfully
Copy the latest program to USB disk, and insert the disk into USB interface. In the main interface, press
[F6] to enter the upgrade interface, and press [F2] to show the interface in Fig. 6.3.1 if the USB disk isn’t
connected successfully. Press any key to return to the main interface.
2) USB disk is connected successfully
To Next Page
Loading...