ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 85 -
Current directory
Multiple copies
copy
copy
Return / Reset /U USB disk / Restart / PC / Help / Return
Fig. 6.3.2 USB disk is connected successfully
If the USB disk is connected successfully, press [Y+], [Y-] in the directory to move cursor to
“2440TEST.BIN” and [OK] to show the interface below:
Current directory
Downloading program file. Please wait
Return / Reset / U USB disk / Restart / PC / Help / Return
Fig. 6.3.3 Upgrading
If the selected file isn’t system upgrade file, the system will prompt automatically, as in Fig. 6.3.4:
To Next Page
Loading...