ADTRAN MX2800 STS-1 - TL1 Error Codes; Table 9-5. TL1 Error Codes

MX2800 STS-1 User Manual Transaction Language 1 (TL1), Section 9
TL1 Error Codes
61204659L1-1A 9-15
6. TL1 ERROR CODES
When the MX2800 STS-1 denies a received TL1 command, the Output Response message has an associ-
ated 4-letter error code indicating the reason for denial. Table 9-5 lists possible error codes.
REPT
EVT
EQPT
(cont’d)
502 (Ctrl A) EVT RCVRY NSA NEND Synchronization Source
Change
503 (Ctrl B)
502 (Ctrl A) EVT SYNCPRI NSA NEND Primary BITS Clock
Change
503 (Ctrl B)
502 (Ctrl A) EVT SYNCSEC NSA NEND Secondary BITS Clock
Change
503 (Ctrl B)
502 (Ctrl A) EVT INT NSA NEND Loss of Activity Failure
503 (Ctrl B)
Table 9-5. TL1 Error Codes
Error Code Description
ICNV Input, Command Not Valid
IITA Input, Invalid Target Identifier
IPNV Input, Parameter Not Valid
PIUI Privilege, Input, User Not Valid
PLNA Privilege, Login Not Active; or Insufficient
Privileges
SSRE Status, System Resources Exceeded
IDRG Input, Data Range
IIAC Input, Invalid Access identifier
SROF Status, Requested Operation Failed
Table 9-4. MX2800 STS-1 Informational Events (Continued)
AID
Notification
Code
Condition
Type
Service
Affecting
Location Description