ADTRAN MX2800 STS-1 - EQPT Data Dictionary; Table 9-9. TL1 Editing Data Dictionary for EQPT

9-26 61204659L1-1A
Section 9, Transaction Language 1 (TL1) MX2800 STS-1 User Manual
TL1 Error Codes
EQPT Data Dictionary
Table 9-9 contains entries that are used to edit or retrieve options for the equipment portion of the
MX2800. When performing TL1 edit commands from this table, the value of rr should be EQPT, and the
<aid> value should be the following:
401 - Generic
Table 9-9. TL1 Editing Data Dictionary for EQPT
Keyword Type Domain Description
CLOCKSTATUSRLY Y/N Y or [N] Provisions alarm relay response for the
Clock Status Changed alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
CLOCKPRIRLY Y/N Y or [N] Provisions alarm relay response for the
Primary Reference Failure alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
CLOCKSECRLY Y/N Y or [N] Provisions alarm relay response for the
Secondary Reference Failure alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
CLOCKLOARLY Y/N Y or [N] Provisions alarm relay response for the
Clock Loss of Activity alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
DIAGBERCLEARCOUNT Y/N Y or [N] Clears BERT count
• Yes (Y) - clears the BERT count
• No (N) - does not clear the BERT count
DIAGBERTCOUNT INT 0, 1, 2, ..., N Error count
DIAGBERTSYNC ENUM One of the following:
•NOSYNC
• SYNC
Identifies state of Pattern Synchronization
• NOSYNC - there is no pattern sync
• SYNC - pattern sync is available