MX2800 STS-1 User Manual Configuration, Section 3
System Management
61204659L1-1A 3-31
Alarm Relay Configuration
This screen enables alarm relay response for specific error conditions (Figure 3-13). The following charts
describe the alarm conditions found in each menu. Conditions marked in the charts with an asterisk (*)
sound the critical alarm when enabled. All other conditions sound the non-critical alarm.
Figure 3-13. Alarm Relay Configuration Menu
As shown on the Alarm Relay Configuration Menu (), available options include the following:
• STS-1 Alarms on page 3-32
• VT/Port Alarms on page 3-33
• System Alarms on page 3-34
• Power Supply Alarms on page 3-35
To Next Page
Loading...
