3-26 61204659L1-1A
Section 3, Configuration MX2800 STS-1 User Manual
System Management
Trap Community Name
Enter the identification string used for trap management. This string accompanies all traps transmitted by
the MX2800 STS-1.
System Security
User Account Management
This option is used to enter up to 15 user accounts. Each user account is assigned a username, password,
and privilege level. Usernames and passwords are not case sensitive but must be 12 characters or less. Each
user account is assigned a privilege level which provides limitation of access to the MX2800 options and
controls. The four privilege levels are listed below.
Guest
Read-only privilege level allows the display of most menu items on the console interface. A limited
number of TL1 commands can be performed; however, none of these can alter the product configuration.
Interface
Write-access privilege level allows the configuration of items related to the network interface and T1/E1
interface, but does not allow initiation of loopbacks or view and/or alteration of system-level items such as
LAN configurables.
Test
Write-access privilege level allows configuration of the network interface and T1/E1 interface, plus initia-
tion of loopbacks. View and/or alteration of system-level items such as LAN configurables, etc. is not
permitted.
Admin
With Admin privilege level, all menu items can be viewed and/or altered. This is the only level that allows
alteration of the User Account Management information.
User accounts provide access to the MX2800 for console interface sessions and TL1 sessions. Table 3-8
provides a summary of privileges.
NOTE
The Load Default Settings menu item that is located on the Configu-
ration/Utilities menu resets the User Account Management table back to a
single default account adtran/adtran/admin.
To Next Page
Loading...
