MX2800 STS-1 User Manual Configuration, Section 3
Save Configuration and Alarm Log
61204659L1-1A 3-43
5. SAVE CONFIGURATION AND ALARM LOG
The Save Configuration option writes the current configuration and alarm log changes to nonvolatile
memory. If this option is not selected after making changes to the configuration and the Auto Save feature
is disabled, the system reverts to its previous configuration when power cycled.
When the Save option is executed, the success or failure response is momentarily displayed at the bottom
of the screen, as shown in Figure 3-15.
Figure 3-15. Indication of a Saved Configuration and Alarm Log
To Next Page
Loading...
