Model A
2
O
®
Advanced Automated Osmometer User’s Guide
Regulatory
approval type Description
U.S. Safety
This product has been listed by
ETL testing
laboratories as being in compliance with
the
requirements of
UL 61010-1, "Electrical
Equipment for Laboratory Use; Part 1: General
Requirements". The "US" in the lower right of the
ETL mark demonstrates this listing.
This product has been listed by ETL testing
laboratories as being in compliance with the
requirements of CAN/CSA C22.2 No. 61010-1,
"Safety
Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use - Part 1:
General Requirements". The "C" in the lower left of
the ETL mark demonstrates this listing.
CE Declaration of
Conformity - EMC
This product meets the intent of Directive 201
4/30/EU
for Electromagnetic Compatibility. Compliance was
demonstrated using the following standards, as listed in
the Official Journal of the European Communities:
Consult the Declaration of Conformity certificate
shipped with the product for the latest update.
· EN 61326-1, EN 61326-2-6: Group 1, Class B,
"Electrical Equipment for Measurement, Control,
and Laboratory Use".
CE Declaration of
Conformity - Low
Voltage
This product meets the intent of Directive 2014
/35/EU,
the Low Voltage Directive. Compliance was demon-
strated using the following standards as listed in the
Official Journal of the European Communities: Consult
the Declaration of Conformity certificate shipped with
the product (if required) for the latest update.
· IEC 61010-1: "Safety Requirements for Electrical
Equipment for Measurement, Control
and
Laboratory Use - Part 1: General Requirements".
To Next Page
Loading...
Need help?
General
