Model A
2
O
®
Advanced Automated Osmometer User’s Guide
76
LAN screen
The LAN Setup screen (Figure 35) is used to setup the connection to a
Local Area Network (LAN). See Appendix E for a description of the
LAN connection.
IP Address
When this button is pressed, a screen is displayed for entering, changing,
or displaying the current IP Address.
Subnet Mask
When this button is pressed, a screen is displayed for entering, changing
or displaying the current Subnet Mask.
Default Gateway
When this button is pressed, a screen is displayed for entering, changing
or displaying the current Default Gateway.
Primary DNS
When this button is pressed, a screen is displayed for entering, changing
or displaying the current Primary DNS.
Figure 3
5
: The LAN Setup Screen
To Next Page
Loading...
Need help?
General
