Figure 24: The Control Solutions Log Screen
specified in the spreadsheet. If None is checked, no action is taken; if
Warning only is checked, a message screen informs the operator; and
if Stop Instrument is
checked, no more sample measurements will be
possible until the condition has been cleared by re-running the control
solution, testing a new lot of control material, or other action.
Controls log
When the Controls Log button is pushed, a Control Solutions Log
screen (Figure 24) displays a spreadsheet that contains a list of actions
of additions, deletions and changes to the control solutions.
Assistance
Brings up the Assistance screen (Figure 37), as described later in this
chapter.
To Next Page
Loading...
