Model A
2
O
®
Advanced Automated Osmometer User’s Guide
Details
Brings up the Hardware Details screen (Figure 31), as described later in
this chapter.
Self Tests
Brings up the Self Tests screen (Figure 32), as described later in this
chapter.
Touchscreen
When this button is pushed, a screen used to calibrate the orientation
and positions on the touchscreen is shown. Follow the instructions on
the screen to perform the calibration.
Date/Time
Brings up the Date/Time screen (Figure 34), as described later in this
chapter.
LAN
Brings up the LAN Setup screen (Figure 35), as described later in this
chapter and in Appendix E.
LIS
Brings up the LIS Setup screen (Figure 36), as described later in this
chapter and in Appendix E.
Error Log
When this button is pushed, a spreadsheet listing all errors appears. The
fields are the description and the date/time of the error. The Export
button is used to save the log in Comma Separated Value (CSV) format
to a USB memory stick if inserted, or to the instrument’s internal mem-
ory.
Export DataB.
When this button is pushed, the entire database stored in the instrument
is exported either to a USB memory stick if inserted, or to the instru-
ment’s internal memory
. Only Advanced Instruments applications can
read this database. The database may be sent to Advanced Instruments
for diagnostic purposes.
To Next Page
Loading...
Need help?
General
