2.4.3 Fuel quality requirements
Requirement Test method
Density, +15°C 0,82 - 0,84 kg/dm3 EN ISO 3675:1998, EN ISO 12185
Viscosity, +40°C 2,0 - 4,5 mm2/s EN ISO 3104
Sulphur content maximum 15 mg/kg EN ISO 14596:2007
Cetane number minimum 51 EN ISO 5165:1998
Water content maximum 200 mg/kg prEN ISO 12937:2000
Lubricity/HFRR maximum 460 μm ISO 12156-1
The fuel must be according to norm EN 590:2009 or ASTM D 975 1-D or 2-D.
CAUTION:
Supplementary admixtures or additives are not allowed.
CAUTION:
Fuels according to EN 590:2009 may contain up to 7% FAME (fatty acid methyl ester) type
biodiesel according to EN 141214:2008. Fuels according to ASTM D975 may contain up to
5% FAAE (fatty acid alkyl ester) type biodiesel according to ASTM D6751-08. Contact
AGCO Power R&D for more information of using different types of biodiesel!
2. Specifications
2-30 4th Generation Engines
8370 79492
To Next Page
Loading...
