Chapter 3 Methods and Mappings 65
USG-CUS-059 Rev05MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
3. Select a method file in the list that appears by tapping the file name.
The method files included in the list depends on the pin array format. For example,
only 6-pin method files will be available for an instrument with a 6-pin array.
4. Tap open to load the file.
The Method screen re-appears, with the selected method file loaded.
NOTE
A 6-pin or 24-pin instrument can be adapted to a 1-pin format using an appropriate adapter kit. See
Appendix A, page 117 for more details on changing pin formats. The 1-pin format is used for custom
dispensing patterns. There are no predefined method files for 1-pin dispensing; you will need to
create a custom method file.
Figure 3.8 Select a Method File
Note: Custom method files also appear in this list.