Chapter 3 Methods and Mappings 67
USG-CUS-059 Rev05MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
Select a mapping file:
1. Tap the mapping file OPEN button on the Method screen (Figure 3.11).
2. Tap a mapping file in the list that appears and tap the open button.
See Table 3.2 for a description of the predefined mapping files.
Figure 3.10 Main Screen and Methods Screen
Figure 3.11 Select a Mapping File
The list of mapping files includes only mapping
files that are appropriate for the current pin array
format. For example, if the instrument is 6-pin
format, only those mapping files specifying a 6-pin
format will be listed here. Custom mapping files
are also included in this list. See page 58 for
information about mapping files.