Chapter 3 Methods and Mappings64
USG-CUS-059 Rev05MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
For example, to create a custom method file, the dispensing parameters in an existing
method file can be changed, and/or a new mapping file can be included in the existing
method file. (Figure 3.6).
Load a method file Load the method file that you want to edit.
1. Tap METHODS on the Main Menu. If you are not on the Main Menu, tap the BACK
button on any screen.
The Method screen appears (Figure 3.7).
2. Tap the OPEN button on the Method screen.
Figure 3.6 Example of Creating a Custom Method File
Load a
Predefined
Method
Custom
Method
FIle
Create a Custom Mapping
Replace default mapping
with a custom mapping
New
parameters
in effect until
others
chosen or
instrument
shutdown.
Save
new method
with new
parameters
and/or
mapping
Apply changes
but do not
Save
(page 64)
(page 74)
Modify Method Parameters
Customize dispensing
parameters
(page 63)
Figure 3.7 Main Menu and Method Screen
To Next Page
Loading...
Need help?
General