To Next Page

To Previous Page

128 1290 Infinity Quaternary Pump User Manual

Error Information

Pump Error Messages

Timeout: Wait for run volume

Error ID: 29181

A target condition (run volume, which is the volume delivered since the

method run start) has been sent to the instrument which should have been

reached within an expected time frame but didn’t. Either the limit, time frame

or the current value of the variable has been modified later directly or

indirectly (for example the flow rate).

Timeout: Wait for Volume

Error ID: 29182

A target condition (volume, which is the delivered flow since the limit has

been set) has been sent to the instrument which should have been reached

within an expected time frame but didn’t. Either the limit, time frame or the

current value of the variable has been modified later directly or indirectly (for

example the flow rate).

Probable cause Suggested actions

Incorrect parameters have been sent to the

instrument by the control software or

manual changes.

Verify control software, macros, manual

commands.