Agilent Technologies 1290 infinity User Manual

1290 Infinity Quaternary Pump User Manual 209
Maintenance
9
Preparing the Pump Module for Transport
Preparing the Pump Module for Transport
1 Flush all solvent channels with isopropanol.
2 Remove solvent inlet tubes from solvent reservoirs and tubing clips at other
modules.
3 Remove tubings between the seal wash function and solvent bottle/waste.
4 Remove cable and capillary connections to other modules.
5 Remove the module from the stack.
6 Remove the waste tube.
When If the module shall be transported or shipped.
Parts required p/n Description
9301-0411 Syringe; Plastic
9301-1337 Syringe adapter
G4204-44000 Transport protection foam
CAUTION
Mechanical damage
➔ For shipping the module, insert the Protective Foam to protected the module from
mechanical damage.
➔ Be careful not to damage tubing or capillary connections while inserting the
module in the Protective Foam.

Agilent Technologies 1290 infinity Specifications

General

Brand	Agilent Technologies
Model	1290 infinity
Category	Laboratory Equipment
Language	English