58 1290 Infinity Quaternary Pump User Manual
4
Using the Module
Best Practices
Seal wash
Using the seal wash function is recommended when using buffers or other
non- volatile solvents or additives that could deposit on pistons and seals. The
seal wash function regularly cleans these parts automatically.
Seal Wash Dialog in OpenLAB Software (1290 Infinity Pumps only):
• Seal Wash settings are NO method parameters
• Find dialog under Control
• On ERROR – seal wash is switched off
• At Power Off – seal wash is switched off
Figure 15 Seal wash dialog
To Next Page
Loading...
