Alcatel-Lucent 7210 SAS M User Manual

Interface Commands
Page 172 7210 SAS M, T, X, R6, Mxp MPLS Configuration
Guide
The no form of the command reverts to the default value.
Default no reliable-delivery
subscription
Syntax subscription percentage
no subscription
Context config>router>rsvp>interface
Description This command configures the percentage of the link bandwidth that RSVP can use for reservation
and sets a limit for the amount of over-subscription or under-subscription allowed on the interface.
When the subscription is set to zero, no new sessions are permitted on this interface. If the
percentage is exceeded, the reservation is rejected and a log message is generated.
The no form of this command reverts the percentage to the default value.
Default 100
Parameters percentage — The percentage of the interface's bandwidth that RSVP allows to be used for
reservations.
Values 0 — 1000

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English