Alcatel-Lucent 7210 SAS M - Page 182

Show Commands
Page 182 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
Sample Output
*A:SRU4>config>router>mpls# show router mpls lsp "to_110_20_1_1_cspf"
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name To Fastfail Adm Opr
Config
-------------------------------------------------------------------------------
to_110_20_1_1_cspf 110.20.1.1 No Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:SRU4>config>router>mpls#
*A:Dut-A# show router mpls lsp transit detail
===============================================================================
MPLS LSPs (Transit) (Detail)
===============================================================================
-------------------------------------------------------------------------------
LSP D_B_1::D_B_1
-------------------------------------------------------------------------------
From : 10.20.1.4 To : 10.20.1.2
State : Up
In Interface : lag-1:10 In Label : 130668
Out Interface : lag-2 Out Label : 131065
Previous Hop : 10.10.14.4 Next Hop : 10.10.12.2
Reserved BW : 0 Kbps
-------------------------------------------------------------------------------
*A:Dut-A#
*===============================================================================
*A:7210-SAS>show>router>mpls# lsp A detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
ff — Specifies a shared reservation environment with an explicit
reservation scope. Specifies an explicit list of senders and a distinct
reservation for each of them.
Negotiated MTU
The size of the maximum transmission unit (MTU) that is negotiated
during establishment of the LSP.
FR Hop Limit
The total number of hops a detour LSP can take before merging back
onto the main LSP path.
LastResignalAt-
tempt
Displays the system up time when the last attempt to resignal this LSP
was made.
VprnAutoBind
Displays the status on VPRN auto-bind feature as enabled or disabled.
Label Description (Continued)