Alcatel-Lucent 7210 SAS M User Manual

Show Commands
Page 192 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
status
Syntax status
Context show>router>mpls
Description This command displays MPLS operation information.
Output MPLS Status Output — The following table describes MPLS status output fields.
*A:7210SAS# show router mpls status
===============================================================================
MPLS Status
===============================================================================
Admin Status : Up Oper Status : Up
Oper Down Reason : n/a
FR Object : Enabled Resignal Timer : Disabled
Hold Timer : 1 seconds Next Resignal : N/A
Srlg Frr : Disabled Srlg Frr Strict : Disabled
Dynamic Bypass : Enabled User Srlg Database : Disabled
Least Fill Min Thd.: 5 percent LeastFill ReoptiThd: 10 percent
Short. TTL Prop Lo*: Enabled Short. TTL Prop Tr*: Enabled
Label Description
Admin Status
Down — MPLS is administratively disabled.
Up — MPLS is administratively enabled.
Oper Status
Down — MPLS is operationally down.
Up — MPLS is operationally up.
LSP Counts
Static LSPs — Displays the count of static LSPs that originate,
transit, and terminate on or through the router.
Dynamic LSPs — Displays the count of dynamic LSPs that origi-
nate, transit, and terminate on or through the router.
Detour LSPs — Displays the count of detour LSPs that originate,
transit, and terminate on or through the router.
FR Object
Enabled — Specifies that Fast reroute object is signaled for the
LSP.
Disabled — Specifies that Fast reroute object is not signaled for
the LSP.
Resignal Timer
Enabled — Specifies that the resignal timer is enabled for the LSP.
Disabled — Specifies that the resignal timer is disabled for the
LSP.
Hold Timer
Displays the amount of time that the ingress node holds before
programming its data plane and declaring the LSP up to the service
module.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English