Alcatel-Lucent 7210 SAS M User Manual

Show Commands
Page 308 7210 SAS M, T, X, R6, Mxp MPLS Configuration
Guide
status
Syntax status
Context show>router>ldp
Description This command displays LDP status information.
Output LDP Status Output — The following table describes LDP status output fields.
Label Description
Admin State
Up — The LDP is administratively enabled.
Down — The LDP is administratively disabled.
Oper State
Up — The LDP is operationally enabled.
Down — The LDP is operationally disabled.
Created at
The date and time when the LDP instance was created.
Up Time
The time, in hundreths of seconds, that the LDP instance has been
operationally up.
Last Change
The date and time when the LDP instance was last modified.
Oper Down Events
The number of times the LDP instance has gone operationally down
since the instance was created.
Active Adjacen-
cies
The number of active adjacencies (established sessions) associated
with the LDP instance.
Active Sessions
The number of active sessions (session in some form of creation)
associated with the LDP instance.
Active Interfaces
The number of active (operationally up) interfaces associated with the
LDP instance.
Inactive Inter-
faces
The number of inactive (operationally down) interfaces
associated with the LDP instance.
Active Peers
The number of active LDP peers.
Inactive Peers
The number of inactive LDP peers.
Addr FECs Sent
The number of labels that have been sent to the peer associated with
this FEC.
Addr FECs Recv
The number of labels that have been received from the peer associated
with this FEC.
Serv FECs Sent
The number of labels that have been sent to the peer associated with
this FEC.
Serv FECs Recv
The number of labels that have been received from the peer associated
with this FEC.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English