VPLS Services Command Reference
Page 336 7210 SAS-X, R6 OS Services Guide
VPLS Service Configuration Commands
Global Commands
config
— service
— vpls service-id [customer customer-id] [create] [vpn vpn-id] [m-vpls][allow-l2pt-xstp-bpdu
enable|disable] [r-vpls]
— no vpls service-id
— bgp
— pw-template-binding policy-id [split-horizon-group group-name]
[import-rt {ext-community...(up to 5 max)}]
— no pw-template-binding policy-id
— route-distinguisher [ip-addr:comm-val | as-number:ext-comm-val]
— no route-distinguisher
— route-target {ext-community | {[export ext-community] [import ext-
community]}}
— no route-target
— vsi-export policy-name [policy-name...(up to 5 max)]
— no vsi-export
— vsi-import policy-name [policy-name...(up to 5 max)]
— no vsi-import
— [no] bgp-ad
— [no] shutdown
— vpls-id vpls-id
— vsi-id
— prefix low-order-vsi-id
— no prefix
— description description-string
— no description
— [no] disable-aging
— [no] disable-learning
— [no] discard-unknown
— no endpoint
— block-on-mesh-failure
— [no] block-on-mesh-failure
— description description-string
— no description
— [no] ignore-standby-signaling
— [no] mac-pinning
— max-nbr-mac-addr table-size
— no max-nbr-mac-addr
— revert-time revert-time | infinite
— no revert-time
— static-mac ieee-address [create]
— no static-mac
— [no] suppress-standby-signaling
— eth-cfm
— [no] mep mep-id domain md-index association ma-index [direction
{up|down}][no] mep mep-id domain md-index association ma-index
— [no] ccm-enable
— ccm-ltm-priority priority
— no ccm-ltm-priority
— [no] description
— [no] eth-test-enable