Alcatel-Lucent 7210 SAS-X - Page 863

VPRN Show Commands
7210 SAS-X OS Services Guide Page 863
Sample Output
*A:ALA-1# show service id 11 authentication statistics
===============================================================
Authentication statistics
===============================================================
Interface / SAP Authentication Authentication
Successful Failed
---------------------------------------------------------------
abc-11-90.1.0.254 1582 3
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#
arp
Syntax arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] [sdp sdp-id:vc-
id] [summary]
Context show>service>id
Description Displays the ARP table for the IES instance.
Parameters ip-address — Displays only ARP entries in the ARP table with the specified IP address.
Default All IP addresses.
mac ieee-address — Displays only ARP entries in the ARP table with the specified 48-bit MAC
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Default All MAC addresses.
sap sap-id — Displays SAP information for the specified SAP ID. See Common CLI Command
Descriptions on page 925 for command syntax.
port id — Specifies matching service ARP entries associated with the specified IP interface.
ip-address — The IP address of the interface for which to display matching ARP entries.
Values 1.0.0.0 — 223.255.255.255
ip-int-name — The IP interface name for which to display matching ARPs.
Output Show Service-ID ARP — The following table describes show service-id ARP output fields.
Label Description
Service ID
The service ID number.
MAC
The specified MAC address
Source-Identifier
The location the MAC is defined.