EasyManua.ls Logo

Alcatel-Lucent 7210 SAS-X - Page 865

Alcatel-Lucent 7210 SAS-X
948 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VPRN Show Commands
7210 SAS-X OS Services Guide Page 865
Sample Output
*A:ALA-12# show service id 1 base
===============================================================================
Service Basic Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : VPRN
Customer Id : 1
Last Status Change: 02/01/2007 09:11:39
Last Mgmt Change : 02/01/2007 09:11:46
Admin State : Up Oper State : Down
Route Dist. : 10001:1
AS Number : 10000 Router Id : 10.10.10.103
ECMP : Enabled ECMP Max Routes : 8
Max Routes : No Limit Auto Bind : LDP
Vrf Target : target:10001:1
Vrf Import : vrfImpPolCust1
Vrf Export : vrfExpPolCust1
SAP Count : 1 SDP Bind Count : 18
------------------------------------------------------------------------------
Service Access & Destination Points
------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
------------------------------------------------------------------------------
sap:1/1/7:0 q-tag 1518 1518 Up Up
sdp:10:1 M(10.20.1.3) TLDP 4462 4462 Up TLDP Down
sdp:20:1 M(10.20.1.4) TLDP 4462 4462 Up TLDP Down
sdp:30:1 M(10.20.1.5) TLDP 4462 4462 Up TLDP Down
sdp:40:1 M(10.20.1.20) TLDP 1534 4462 Up Up
sdp:200:1 M(10.20.1.30) TLDP 1514 4462 Up Up
Def. Mesh VC Id
This object is only valid in services that accept mesh SDP bindings. It is
used to validate the VC ID portion of each mesh SDP binding defined
in the service.
SAP Count
The number of SAPs defined on the service.
SDP Bind Count
The number of SDPs bound to the service.
Identifier
Specifies the service access (SAP) and destination (SDP) points.
Type
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on the SDP.
AdmMTU
Specifies the desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
OprMTU
Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
Opr
The operating state of the SDP.
Label Description

Table of Contents