MPLS and RSVP
7450 ESS MPLS Guide Page 243
dest-global-id — Specifies the destination global ID. If the destination global ID is not entered, then it
is set to the same value as the source global ID.
Values 0 — 4294967295
dest-node-id — Specifies the destination node ID.
Values a.b.c.d or 1 — 4294967295
dest-tunnel-num — Specifies the destination tunnel number. If the destination tunnel number is not
entered, then it is set to the same value as the source tunnel number.
Values 1 — 61440
forward-path
Syntax [no] forward-path
Context config>router>mpls>mpls-tp>transit-path
Description This command enables the forward path of an MPLS-TP transit path to be created or edited.
The forward path must be created before the reverse path.
The no form of this command removes the forward path. The forward path cannot be removed if a
reverse exists.
Default no forward-path
reverse-path
Syntax [no] reverse-path
Context config>router>mpls>mpls-tp>transit-path
Description This command enables the reverse path of an MPLS-TP reverse path to be created or edited.
The reverse path must be created after the forward path.
The no form of this command removes the reverse path. The reverse path must be removed before the
forward path.
Default no reverse-path
To Next Page
Loading...
