Page 494 7450 ESS MPLS Guide
Sample Output
*A:SRU4>show>router>lmp# te-link 254
================================================================================
LMP TE Link 254 (Name) Statistics
================================================================================
Admin State : In Service Oper State : Degraded
Remote Id : 10 Peer Node Id : 15
--------------------------------------------------------------------------------
Message Type Received Sent Retransmitted
--------------------------------------------------------------------------------
LinkSummary 100 100 600
LinkSummaryAck 30 25 N/A
LinkSummaryNack 70 75 N/A
================================================================================
data-bearer
Syntax data-bearer [data-bearer-id] [detail]
Context show>router>lmp>te-link
Description This command displays LMP data bearer information.
Parameters data-bearer-id — Specifies the ID of a data bearer link.
detail — Keyword to display more detailed output.
Output Data Bearer Output Fields — The following table describes data bearer output fields.
Oper State
The operational state of the TE link.
Remote Id
The remote ID of the TE link.
Peer Node Id
The LMP peer node ID.
Received
The total number of received packets of a specific type.
Sent
The total number of sent packets of a specific type.
Retransmitted
The total number of retransmitted packets of a specific type.
Label Description (Continued)
Label Description
Admin State
The administrative state of the data bearer link.
Oper State
The operational state of the data bearer link.
Remote Id
The remote ID of the data bearer link.
Port
The port used by the data bearer link.
To Next Page
Loading...
