Alcatel-Lucent 7450 - Page 737

LDP
7450 ESS MPLS Guide Page 737
session ip-addr[label-space] — Specifies the IP address and label space identifier.
Values <ip-addr[label-spa*> : ipv4-address:label-space
ipv6-address[label-space]
label-space - [0..65535]
ipv4
Syntax ipv4 [summary|detail] [egress-if port-id]
ipv4 [summary|detail] [egress-lsp tunnel-id]
ipv4 [summary|detail] [egress-nh ip-address]
Context show>router>ldp>bindings
Description This command display LDP active IPv4 bindings.
Parameters egress-if port-id — Displays LDP active bindings by matching egress-if.
egress-lsp tunnel-id — Specifies the tunnel identifier for this egress LSP.
Values 0 — 4294967295
egress-nh ip-address — Displays LDP active bindings by matching egress-nh.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
detail — Displays detailed information.
summary — Displays information in a summarized format.
ipv6
Syntax ipv6 [summary|detail] [egress-if port-id]
ipv6 [summary|detail] [egress-lsp tunnel-id]
ipv6 [summary|detail] [egress-nh ip-address]
Context show>router>ldp>bindings
Description This command display LDP active IPv6 bindings.
Parameters egress-if port-id — Displays LDP active bindings by matching egress-if.
egress-lsp tunnel-id — Specifies the tunnel identifier for this egress LSP.
Values 0 — 4294967295
egress-nh ip-address — Displays LDP active bindings by matching egress-nh.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d