Alcatel-Lucent 7450 - Page 738

Show Commands
Page 738 7450 ESS MPLS Guide
x - [0..FFFF]H
d - [0..255]D
detail — Displays detailed information.
summary — Displays information in a summarized format.
label-type
Syntax label-type start-label start-label [end-label end-label] label-type [family]
Context show>router>ldp>bindings
Description This command displays LDP FEC bindings by matching labels.
Parameters start-label — Specifies a label value to begin the display.
Values 16 — 1048575
end-label — Specifies a label value to end the display.
Values 17 — 1048575
family — Displays either IPv4 or IPv6 LDP information.
p2mp
Syntax p2mp p2mp-id identifier root ip-address [session ip-addr[label-space]] [summary|detail]
p2mp [session ip-addr[label-space]] [family] [summary|detail] [opaque-type opaque-
type]
p2mp source ip-address group mcast-address root ip-address [rd rd] [session ip-
addr[label-space]] [summary|detail]
Context show>router>ldp>bindings
Description This command displays LDP P2MP FEC bindings.
Parameters p2mp-id identifier — Displays LDP active P2MP identifier bindings.
Values 0 — 4294967295
root ip-address — Displays root IP address information.
detail — Displays detailed information.
summary — Displays information in a summarized format.
family — Displays either IPv4 or IPv6 active LDP information.
opaque-type opaque-type — Specifies the type of a Multi-Point Opaque Value Element.
Values generic, ssm, vpn-ssm